The Brick 🧱 by Brix Cannabis
This 1oz brick came in at 18.9% THC, bricked June 8th 2023 with an Integra pack
Opening up the bag, you have the vacuum packed brick of cannabis.
I'm trying to figure out what the humidity pack is for, if the brick is vacuum sealed 🤷♂️ maybe its for personal use after you open it?
So, I wasn't really sure what to do with the brick, but its a brick, so I had to review it, and try everything out....because Science. 🧙♂️
First, taking the brick out of the factory seal, no real terps jump out at you. The brick is SOLID, you can knock it on a counter and not lose shape.
I thought it would be cool if you were able to cut strips, and just wrap the strip up, so I tried that first.
The first one I tried, the Raw rolling machine was a bit too small, so I swapped out for the larger Kingpin one.
I was able to wrap it, and attempted to smoke it. I couldn't get a pull, so I ran a drill through it multiple times to create as many airways as possible. The density of the brick is too high to smoke like this without grinding, I wasn't able to get any good pulls 😢
I think grinded it to fill a cone.
I used an Wakit grinder to break apart some pieces of the brick, but that didn't work as well, I ended up having to go manual with scissors to finely chop it.
The J wasn't bad. A lot of coughing, but a decent high. The only taste I could really pick out was a light lemony / pine taste.
The ash burned grey/white, with a bit of a resin ring.
The rest of the brick I slid into a 160u micron bag (just going for quantity) and gave it a pressing.
VERY dark, of course.
I was able to collect a bit over 3grams from roughly 21g of material
After letting it cure a bit, I tried a massive dab.
The taste wasn't as bad as I thought it was going to be. A lot of citrus zesty notes came out, with that aftertaste of gin/pine.
The high, on average from the different attempts was always very uplifting, a slight glow behind the eyes, and a craving to go smoke something else that wasn't in a brick😂
Comentários